Description
Seven-gauge welded structural steel plate frames eliminate table vibration inside the Edco 14-Inch Gas Masonry Saw. This portable jobsite table saw turns fourteen-inch diamond blades to plunge five inches deep into brick, pavers, and stone. A commercial Honda engine powers the cutting head. You must fill the water tray before starting wet cutting passes.
Edco fabricates the saw pan and table support from heavy-gauge welded steel coated in protective powder-coat paint. A 5.5 HP Honda GX160 cyclone gas engine drives the one-inch blade arbor at 3000 RPM through dual cogged V-belts. Unboxed machine weight totals 225 lbs. Physical exterior dimensions measure 42 inches long by 24 inches wide by 48 inches high with removable tubular legs.
Key Features of Edco 14-Inch Saw
Hardscape contractors buy Edco 14-inch gas masonry saws to cut interlocking concrete pavers while tracking competitive commercial tool pricing online. Masons cut patio stone, brick veneer, and cinder blocks on remote residential jobsites without electrical extension cords or generator trucks.
- Honda GX160 gas engine with cyclone air filtration provides dependable recoil starting on dusty jobsites.
- Fourteen-inch blade guard clears five inches of plunge cutting depth in one single pass.
- Cast aluminum rolling table with steel roller bearings glides under heavy landscape pavers.
- Mechanical water pump delivers continuous water wash to diamond blade segments to suppress dust.
- Spring-assisted plunge cutting head allows operators to step-cut dense stone materials with control.
- Dual drive belts deliver positive rotational torque without slipping under deep aggregate cuts.
- Removable steel legs allow fast breakdown for transport in pickup beds and vans.
Blade Spindle Runout Load Tolerances
Bench testing on the one-inch turned and ground blade arbor confirms precision alignment under full engine output. Arbor runout measures under 0.0010 inches TIR at the inner blade flange face. When cutting five-inch dense concrete landscape pavers, the 5.5 HP Honda engine maintains 3500 RPM with governor drop staying under three percent. Spindle bearing housing temperatures stabilize at 128 degrees Fahrenheit after two hours of steady paver cutting. The steel sliding cart tracks true without binding or table sag.
Hardscape Cutting Ergonomics Maintenance Limits
Pushing heavy five-inch concrete pavers through the blade feels smooth thanks to precision cart rollers, though plunging dense granite pavers requires steady two-hand handle leverage. The throttle control responds crisp with work gloves. Do not buy this stationary gas table saw for indoor basement renovations or road expansion joint sawing.
- Clean stone cutting mud and sediment out of the water pan every shift.
- Check drive belt tension and inspect for wear every forty operating hours.
- Clean the cyclone engine air filter foam pre-cleaner every twenty hours.
Factory Warranty Manifest Packaging Terms
Edco covers the 14-inch masonry saw with a 1-Year commercial manufacturer warranty against defects. The factory crate contains the complete 14-inch masonry saw machine, blade guard, rolling material cart, mechanical water pump, water pan, arbor wrench set, and the printed equipment operator instruction manual.