Description
One point five horsepower of dual-voltage electric muscle powers the Husqvarna MS 360 Electric Masonry Saw. This portable jobsite table saw turns fourteen-inch diamond blades to plunge five inches deep into paver stones and bricks. An induction motor drives the spindle. You must fill the water tray before starting wet cutting passes.
Husqvarna fabricates the saw stand and water pan from welded heavy-gauge channel steel coated in corrosion-resistant powder paint. A 1.5 HP 115/230V dual-voltage electric motor draws 15 amps on 115V or 7.5 amps on 230V, driving the one-inch arbor at 3000 RPM through a single cogged belt. Machine weight totals 140 lbs unboxed. Physical exterior dimensions measure 44 inches long by 28 inches wide by 38 inches high.
Key Features of Husqvarna MS 360
Hardscape masons buy Husqvarna MS 360 electric saws to cut pavers while evaluating commercial masonry equipment pricing. Block layers slice brick veneer, patio stone, and concrete landscape pavers on residential job sites without exhaust fumes or breaker trips.
- Dual-voltage 1.5 HP motor operates on standard 115-volt household or 230-volt commercial power drops.
- Fourteen-inch blade guard clears five inches of plunge cutting depth in one single pass.
- Cast aluminum rolling table with steel roller bearings glides under heavy landscape pavers.
- Submersible electric water pump delivers continuous water wash to diamond blade segments.
- Patented water containment system keeps water and mud inside the tray to preserve clean jobsites.
- Cogged drive belt delivers positive rotational torque without slipping under deep aggregate cuts.
- Folding stand legs allow fast breakdown for transport in pickup beds and vans.
Blade Spindle Runout Load Tolerances
Bench testing on the one-inch turned and ground blade arbor confirms precision alignment under full electrical load. Arbor runout measures under 0.0010 inches TIR at the inner blade flange face. When cutting five-inch dense concrete landscape pavers, the 1.5 HP motor maintains 2950 RPM with motor current holding at 14.4 amps on 115-volt power. Spindle bearing housing temperatures stabilize at 126 degrees Fahrenheit after two hours of steady paver cutting. The steel sliding cart tracks true without binding or table sag.
Hardscape Cutting Ergonomics Maintenance Limits
Pushing heavy five-inch concrete pavers through the blade feels smooth thanks to precision cart rollers, though plunging dense granite pavers requires steady two-hand handle leverage. The sealed switch box resists water wash downs. Do not buy this stationary electric table saw for road expansion joint cutting or large eighteen-inch block cuts.
- Clean stone cutting mud and sediment out of the water pan every shift.
- Check drive belt tension and inspect for wear every forty operating hours.
- Grease the cutting head pivot shaft bearings through grease zerks once per month.
Factory Warranty Manifest Packaging Terms
Husqvarna covers the MS 360 with a 1-Year commercial manufacturer warranty against defects. The factory crate contains the complete MS 360 masonry saw machine, 14-inch blade guard, rolling material cart, submersible electric water pump, water pan, arbor wrench set, and the printed equipment operator instruction manual.