Description
Slice heavy steel railway tracks square across the head with the Husqvarna K 1270 Rail Power Cutter. This specialized 119cc gas machine turns sixteen-inch abrasive wheels to sever welded mainline rails in minutes. A cast clamp arm locks the saw square. You must reposition the rail clamp attachment when making opposite cuts on switches.
Husqvarna constructs the powerhead around a high-strength magnesium crankcase paired with a cast steel track clamp fixture. The 7.8 HP 119cc two-stroke single-cylinder engine drives the one-inch blade arbor at 4700 RPM through a double-reinforced poly-V belt. Tool weight totals 46.7 lbs with rail clamp mounted. Exterior dimensions measure 31 inches long by 11 inches wide by 18 inches high.
Key Features of Husqvarna K 1270
Railroad track maintenance crews buy Husqvarna K 1270 Rail cutters to replace battered rail joints while tracking commercial railway tool pricing. Roadmasters execute dead-square rail cuts through heat-treated steel tracks without wandering off ninety-degree cut angles.
- Specialized rail clamp fixture locks the saw square to eliminate crooked track joint gaps.
- High-displacement 119cc engine delivers 7.8 horsepower to maintain cutting speed in hardened steel rail.
- Active Air Filtration centrifugal cleaner removes ninety-eight percent of airborne abrasive track grit.
- Reversible cutting arm allows cuts from either side of track switches and crossings.
- Decompression valve and digital ignition system guarantee dependable recoil starts in freezing snow.
- Sixteen-inch abrasive wheel guard clears cuts through heavy continuous-welded steel track sections.
- Anti-vibration handle design cuts shock transfer to protect operator joints on long track runs.
Rail Clamp Alignment Spindle Tolerances
Bench calibration verifies strict angular precision through the cast rail clamp fixture. Blade arbor runout measures under 0.0012 inches TIR across the blade clamping collar. Under continuous cutting in one-hundred-thirty-six-pound continuous welded rail, the 119cc engine maintains 8800 RPM with torque output staying above 90 percent of peak rating. Crankcase temperatures stabilize at 160 degrees Fahrenheit during back-to-back track cuts. The clamp fixture holds square cut perpendicularity within 0.010 inches across the entire six-inch rail base.
Track Maintenance Ergonomics Field Limits
Locking this 47-pound rail saw onto track heads is straightforward thanks to large clamp screw handles, though lifting the saw between rail ties requires two workers. The decompression button eases recoil pull resistance with work gloves. Do not buy this specialized track saw for cutting concrete slabs or flat trench pavement.
- Inspect the rail clamp jaw faces for metal deformation before each track shift.
- Check tension on the poly-V drive belt every twenty operating hours.
- Clean the foam pre-filter air cleaner sponge every twenty track cuts.
Factory Warranty Manifest Packaging Terms
Husqvarna covers the K 1270 Rail cutter with a 1-Year commercial manufacturer warranty against defects. The factory package contains the complete K 1270 Rail power cutter, RA10 rail clamp fixture, combination wrench tool, sixteen-inch wheel guard, two-stroke oil bottle, and the printed railway maintenance operator manual.