Description
Continuous batch processing hits forty bags per hour with the MudMixer Heavy-Duty Steel MudMixer Pro. This beast combines an open hopper, electric auger drive, and adjustable water dial to feed mixed mud without pause. Electric motors spin the auger through tough mortar. You must regulate incoming water hose pressure by hand to keep consistency stable all day.
The machine frame utilizes heavy 14-gauge high-strength steel with a powder-coated finish. An integrated 0.5 HP electric drive motor runs on standard 120V single-phase power, drawing 10 full-load amps under continuous load. MudMixer Pro tips the scales at 145 lbs empty. Exterior dimensions span 65 inches long by 22 inches wide by 34 inches high, rolling on flat-free foam tires.
Key Features of MudMixer Pro
Contractors buy MudMixer Pro units to automate continuous fence post footings while looking up commercial mixer pricing online. Crews finish sidewalk repairs without stopping to load drum batches.
- Continuous screw auger chews dry bagged concrete while introducing water inside the tube.
- Integrated water pressure dial regulates flow volume to control output slump density.
- Drop-in bag breaker teeth split 80-pound concrete sacks in one swift downward push.
- Reversible electric auger motor clears aggregate jams without disassembling the chute.
- Flat-free run tires handle jobsite rebar, roofing nails, and jagged concrete debris.
- Secondary wash hose attachment allows quick chute cleanout before mud cures inside.
- Removable hopper frame sections fit inside short pickup truck beds for easy transport.
Auger Torque Slump and Feed
Dynamometer testing confirms stable auger torque across varied aggregate profiles. The motor pulls 8.8 amps feeding standard 4000 PSI gravel mix, jumping to 11.2 amps when clearing dry mortar bridge buildup. Slump consistency tests stay within a four to six-inch cone rating once water pressure locks at 40 PSI. Chute tube runout stays under 0.020 inches during full gravel push. The auger delivers 60 lbs of mixed concrete every single minute.
Handling Notes Service and Restrictions
The low hopper height saves your shoulders when slinging sixty-pound sacks all morning. The power switch sits high on the control box for quick access with mud-caked gloves. Do not buy this machine for dry aggregate mixes or resinous epoxy mortars. It demands water-soluble dry bagged blends.
- Rinse the auger tube with clean water within ten minutes of motor shutdown.
- Lubricate main drive shaft carrier bearings every fifty hours through grease zerks.
- Inspect the water control diaphragm valve each season for sand sediment blockages.
- Check drive chain tension every month and apply dry graphite spray lubricant.
Warranty Terms and Unboxing Manifest
MudMixer provides a 1-Year limited manufacturer warranty against material defects. The crated package contains the MudMixer Pro machine, secondary wash spray nozzle, bag splitter blade, flat-free rolling tires, electric power cord, hopper extension screens, and the printed manual.