Description
Dual counter-rotating paddles shear thick polymer screeds while a perimeter scraper forces unmixed powder back into the vortex. The CS Unitec Twinmix 1800 TFR pairs an 1800-watt drive motor with flat-floor casters to mix sixteen gallons fast. Installers place floor resins fast. Clamping pins require manual engagement before tipping heavy tubs.
Heavy tubular powder-coated steel forms the transport cart to prevent frame twisting under heavy viscous loads. A dual-speed 15-amp 110V electric drive delivers 2.4 horsepower through a heavy two-spindle reduction gearbox. Counter-rotating steel paddles sweep an integrated scraper blade around a tough sixteen-gallon polyethylene canister. Four non-marking polyurethane swivel casters roll across interior floors. Machine weight sits at 154 lbs with dimensions measuring 30 inches wide by 34 inches long by 48 inches high.
Key Features of CS Unitec TWINMIX-1800-TFR
Commercial flooring crews buy CS Unitec TWINMIX-1800-TFR stations when commercial mortar mixer pricing requires rapid void-free mixing on flat interior slabs. This station mixes epoxy screeds, self-leveling cement, polymer mortars, and quartz coatings.
- Sixteen-gallon bucket capacity holds up to four dry bags of floor compound per batch.
- Dual counter-rotating paddles shear heavy mixtures in half the time of single drills.
- Integrated bucket wall scraper blade prevents unmixed powder from sticking along tub perimeters.
- Two-speed 1800-watt electric drive provides high torque for viscous aggregate slurries.
- Balanced cart tilt mechanism lets one worker pour mixed mud with pinpoint accuracy.
- Dust extraction vacuum port connects to shop vacs to capture hazardous silica dust clouds.
- Smooth polyurethane swivel casters roll across flat subfloors without scuffing finished surfaces.
Twin Spindle Bench Torque Metrics
Bench testing confirms spindle rotation speeds hold at 250 RPM on the center shaft and 450 RPM on the outer paddle under a 200-pound polymer load. Spindle runout measures less than 0.003 inches TIR at six inches from the drive chuck. Current draw holds at 14.1 amps while churning thick resin mortar. Motor shell temperatures level off at 142 degrees Fahrenheit after four continuous batch cycles. Counter-rotating gears show zero tooth pitting after fifty hours of bench stress testing.
Indoor Usability Canister Upkeep Procedures
The balanced tilt handle lets single workers pour sixteen gallons of self-leveler onto floor slabs without spine strain. Swivel casters roll across flat commercial floors with ease. Do not buy this machine for mixing structural coarse gravel concrete or stiff brick mortar.
- Wash paddle sets in water or solvent right after completing each batch run.
- Wipe clean the bucket rim locking clamp to ensure solid tub retention during pours.
- Blow out motor cooling slots with clean compressed air each work week.
Factory Warranty Station Package Inclusions
CS Unitec backs this mixing station with a 1-Year limited manufacturer warranty against material defects. The complete package contains the Twinmix 1800 drive motor, mobile transport cart, dual counter-rotating paddles, wall scraper blade, sixteen-gallon mixing bucket, vacuum port adapter, and printed operator instruction manuals.