Description
High-density polyethylene prevents dried concrete adhesion inside the IMER Wheelman II Poly Drum Mixer. This mobile wheelbarrow mixer handles five cubic feet of volume with an electric direct-drive motor. You dump batches straight into footings without transferring mud to a separate cart. You must maintain wheel tire pressure for stable transport across dirt.
IMER molds the drum from UV-treated thick-wall polyethylene mounted to a tubular steel wheelbarrow frame. A 0.5 HP 110V single-phase electric motor draws 5 FLA, rotating the drum at 24 RPM through a sealed oil-bath gearbox. Net weight registers at 115 lbs unboxed. Physical dimensions measure 58 inches long by 28 inches wide by 32 inches high on a large pneumatic tire.
Key Features of IMER Wheelman II Poly
Stucco applicators buy IMER Wheelman II poly drum mixers to speed residential repairs while checking pricing on commercial equipment. Tradesmen mix three cubic feet of mortar and roll it across finished yards without leaving tire ruts.
- Polyethylene drum cleans up fast by tapping the plastic exterior with a rubber mallet.
- Direct oil-bath gearbox eliminates slipping belts, pulleys, and external grease points.
- Wheelbarrow chassis rolls through tight thirty-inch residential garden gates without snagging door frames.
- Quiet electric motor operates on standard household 110-volt fifteen-amp circuits.
- Pneumatic front tire absorbs vibration over rough stone pathways and yard terrain.
- Dual curved steel paddles lift and blend stiff mortar mixes without leaving dry spots.
- Adjustable front pedestal foot stabilizes the mixer frame during full rotation.
- Built-in thermal overload protection cuts power if extension cords drop voltage.
Current Draw Drum Flex Tolerances
Bench dynamometer testing demonstrates low rotational drag inside the sealed transmission housing. Free motor draw idles at 3.1 amps, climbing to 5.2 amps under a 240-pound payload of wet stone aggregate. Drum shaft runout measures less than 0.028 inches TIR under loaded rotation. Gearbox casing temperatures top out at 126 degrees Fahrenheit during four-hour continuous runs. The flexible poly drum wall absorbs hard impact shocks, returning to true circular form without crack propagation or permanent denting.
Wheelbarrow Handling Maintenance Application Boundaries
Pushing this rig mimics a standard contractor wheelbarrow, though wet batches require confident arm control over slick mud. The sealed switch resists water wash downs. Do not buy this poly drum mixer for multi-yard foundation pours or high-production road slab paving. It is designed for small masonry, stucco, and deck footing tasks.
- Tap the drum exterior with rubber mallets to release dried mortar residue.
- Inspect front tire pressure once each week to guarantee stable cart balance.
- Keep motor cooling air vents clear of wet mortar splatter during batching.
Warranty Terms Shipping Crate Items
IMER backs the Wheelman II poly mixer with a 1-Year commercial manufacturer warranty. The factory package contains the wheelbarrow frame chassis, 5-cubic-foot poly drum, 0.5 HP electric motor, oil-bath gearbox, pneumatic tire, steel paddle set, support stand, and the printed mechanical operator instructions.