Description
Delivering 1000 ft-lbs calibrated continuous torque, the TorcUP 1-Inch Pneumatic Torque Wrench tightens industrial pipeline flanges, heat exchanger heads, and crane slewing rings to certified torque specs without impact hammer shock. Operating on 90 PSI regulated air lines, the precision pneumatic stall motor couples to an epicyclic planetary gearbox, generating up to 1000 ft-lbs of continuous calibrated torque. Industrial bolting crews tighten flange studs with certified accuracy. The tool draws 38 CFM at stall.
Key Features of TorcUP 1000-PTW-FL
Industrial pipeline contractors, wind turbine maintenance crews, and structural steel erectors buy TorcUP 1-Inch Pneumatic Torque Wrenches to tighten critical flange studs to certified foot-pound specifications. Compare commercial pneumatic continuous-drive torque wrench pricing to equip your heavy industrial bolting crews.
- Continuous-drive pneumatic planetary gear system delivers 1000 ft-lbs of calibrated torque without impact hammer shock cleanly.
- Integrated reaction arm absorbs high torsional back-forces against adjacent flange nuts, protecting operator wrists cleanly.
- Calibrated air pressure regulation chart allows operators to dial in exact foot-pound torque targets by adjusting input air PSI cleanly.
- Reversible drive motor allows fast continuous bolt run-downs and break-outs with zero impact vibration cleanly.
- Standard 1-inch square drive output spindle accepts commercial heavy-duty industrial impact and torque sockets cleanly.
- Heavy-duty alloy steel housing withstands severe offshore oil platform and pipeline excavation environments squarely.
High-tensile alloy steel forms the cylindrical motor housing and multi-stage planetary gearbox, finished in durable industrial plating to resist chemical washdowns and offshore saltwater corrosion. A precision splined output collar anchors the heavy forged steel reaction arm, transferring reaction forces into adjacent flange hardware. Sized for industrial bolting crates, the bare torque multiplier weighs 12.5 lbs, measuring 12.5 inches long with a 1-inch square drive anvil.
Calibrated Torque Bench Limits
Torque analyzer bench testing confirms the pneumatic stall motor and planetary gearbox deliver 1000 ft-lbs of continuous torque within plus or minus three percent accuracy across 90 PSI regulated air lines. Running down 1-1/8-inch Grade-B7 pipeline studs to 950 ft-lbs completes in 4.8 seconds without hydraulic oil leaks or impact hammer chatter. The reaction arm extension withstands two thousand foot-pounds of static bending load without arm deflection.
Pipeline Bolting Negative Selection Filter
The reaction arm must seat firmly against an adjacent stationary nut before pulling the throttle trigger. Do not purchase this continuous-drive torque wrench for loose tire wheel spinning requiring rapid impact hammer blows, sheet metal screw fastening, or operating on unregulated dirty air lines lacking an inline filter-regulator-lubricator unit.
- Connect the tool exclusively to a calibrated pneumatic air regulator with clean lubricated air delivery.
- Inspect the splined reaction arm collar for metal burrs or hairline fractures before every high-torque flange bolting run.
- Recalibrate the pneumatic torque wrench on a certified torque tester annually or after every one hundred thousand bolting cycles.
Factory Warranty Hardware Manifest
TorcUP backs this pneumatic torque wrench with a 1-Year limited manufacturer warranty covering planetary reduction gears, motor vanes, and reaction arm components. The factory shipment case includes one 1-inch pneumatic torque wrench, reaction arm, calibration certificate, and technical user manual.