Description
Delivering 0.7 CFM at 90 PSI, the Senco FinishPro 18 Compressor Combo Kit bundles an oil-free portable hot-dog air compressor with a heavy-duty 18-gauge brad nailer for immediate interior trim installations. The 0.5 HP direct-drive motor powers an oil-free aluminum pump across a 1-gallon tank up to 125 PSI with an ultra-quiet 68 dBA noise rating. Finish carpenters install baseboards, door casings, and crown molding with fast tank recovery. The compact 1-gallon tank requires short recovery pauses during fast multi-nail bursts.
Key Features of Senco PC1010-FP18
Finish carpenters and cabinet installers buy Senco FinishPro 18 Compressor Combo Kits to handle interior trim installations with bundled precision pneumatic tools. Compare commercial portable finish compressor combo pricing to equip your carpentry crew with turnkey finish air tools.
- Direct-drive 0.5-horsepower motor delivers 0.7 CFM at 90 PSI up to 125 PSI maximum operating pressure cleanly.
- Included FinishPro 18 brad nailer drives 5/8-inch to 2-inch fasteners cleanly into hardwood moldings without surface marring cleanly.
- Ultra-quiet 68 dBA operating noise rating permits interior punch-out trim work inside occupied offices and residential spaces.
- Ultra-lightweight 20-pound hot-dog tank design provides easy one-handed transport up stairs and into tight attic spaces.
- Rubber suction-cup feet grip smooth floors tightly, dampening operating vibration and preventing surface scuff marks cleanly.
- Included twenty-five-foot coil air hose and tool fittings provide immediate out-of-the-box jobsite readiness cleanly.
Cast aluminum forms the pump cylinder and crankcase, providing efficient thermal heat transfer while keeping carrying weight down. The FinishPro 18 brad nailer features a lightweight magnesium body with an oil-free motor and rear exhaust. Sized for finish carpentry, the bare hot-dog compressor weighs 20 lbs, measuring 14 inches long, 12.5 inches wide, and 10 inches high, featuring non-marking rubber suction feet that eliminate vibration creep on hardwood floors.
Recovery Cycle Dynamic Bench Limits
Flowmeter bench testing confirms delivered air output measures 0.7 CFM at 90 PSI and 1.0 CFM at 40 PSI, supporting single 18-gauge brad nailer firing rates cleanly. Tank pump-up from zero to 125 PSI cut-out takes 128 seconds, with recovery cycle time from 90-PSI cut-in to 125-PSI cut-out clocking at 35 seconds. Operating sound levels register at 68 dBA, allowing quiet indoor trim installation without disrupting occupied homes. The 4-amp universal electric motor draws low current at 120V, running smoothly on residential 15A circuits.
Fine Finish Negative Selection Filter
The cushioned foam grip handle balances the twenty-pound tool comfortably in one hand during room-to-room punch lists. Do not purchase this ultra-compact 1-gallon combo kit for production framing guns, roofing nailers, air grinders, or continuous paint spraying requiring high CFM. Routine care requires opening the bottom brass tank drain valve daily after work, inspecting air coupler O-rings for leaks, and blowing dust off the motor shroud.
Factory Warranty Hardware Manifest
Senco covers this portable finish air compressor combo with a 1-Year limited manufacturer warranty against motor failures, pump component defects, and nailer driver circuitry. The factory shipment carton includes one 1-gallon compressor, FinishPro 18 brad nailer, coiled air hose, safety glasses, sample fasteners, and manual.