Description
Why sacrifice floor rigidity or worktable travel when a cast-iron pedestal machine delivers dependable drilling precision? The JET J-2500 Floor Drill Press clears 15-Inch workpieces across sixteen stepped spindle speeds. You adjust speed across pulley steps. Speed changes require manual V-belt repositioning across multi-groove pulleys underneath the hinged top steel hood on every shift.
Heavy ASTM gray iron forms the precision-ground worktable and wide floor base, anchoring spindle stability under heavy cutting loads. A 3/4-HP enclosed induction motor connects to standard 115V 1-Phase power, drawing 9.0 full-load amps to drive 16-Spindle speeds from 200 to 3630 RPM via dual V-belts. The 3-Inch ground steel column supports the rack-and-pinion table lift. The floor machine scales at 167 lbs, measuring 27 inches deep by 15 inches wide across its footprint.
Key Features of JET J-2500
Maintenance shops buy JET J-2500 floor drill presses to bore accurate holes in steel brackets and hardwoods without bench clutter. The sixteen-speed range gives you the exact spindle velocity needed for small bits or hole saws.
- Dedicated 3/4-HP motor operates on standard 115V 1-Phase shop electrical power.
- Dual V-belt drive transmission delivers 16-Spindle speeds ranging from 200 to 3630 RPM.
- Morse Taper 2 spindle socket seats standard drill chuck arbors and taper-shank twist drills.
- Deep 3-3/8-Inch quill stroke handles through-hole drilling with adjustable depth stop repeat accuracy.
- Heavy cast iron table tilts 45-Degrees left and right for accurate bevel hole boring.
- Three-inch ground steel column stops chatter during heavy downfeed metal cutting passes.
- Front safety paddle power switch includes a removable lockout key to prevent unauthorized shop use.
Spindle Runout Bench Load Metrics
Precision dial test indicators confirm total indicated runout (TIR) measures under 0.0012 inches at the Morse Taper 2 spindle nose. Drilling a 3/4-Inch hole in 1/2-Inch cold-rolled steel drops spindle speed from 420 free RPM to 395 loaded RPM under sustained manual downfeed. Column deflection holds within 0.004 inches under 150 lbs of quill downforce. The TEFC induction motor maintains casing temperatures under 125 degrees Fahrenheit after 45-Minutes of continuous metal drilling cycles on test stands.
Shop Floor Handling Operational Limits
The three-spoke downfeed handles give you solid mechanical leverage across the entire 3-3/8-Inch quill stroke. Skip this floor drill press for high-speed production stamping or deep-hole gun drilling. The stepped pulley drive requires manual belt shifts, and the 167-lb frame requires two workers to move across shop bays. Lock the table clamp handle before loading heavy stock.
- Wipe the ground cast iron table with paste wax monthly to prevent surface rust formation.
- Check V-belt tension every 3-Months and adjust motor bracket tension screws to stop drive slip.
- Lubricate the rack-and-pinion table elevation gears every 6-Months with light machine oil.
Factory Warranty Standard Crate Manifest
JET backs the J-2500 floor drill press with a 2-Year commercial warranty covering manufacturer defects. The crated factory package delivers the steel floor column, cast base, 3/4-HP headstock, tilting worktable, 5/8-Inch keyed drill chuck, MT2 arbor, drift key, hardware pack, and an illustrated operator instruction manual.
