Description
Meeting commercial shop safety and precision drilling codes on low-voltage lines requires inverter motor control and automatic spindle braking. The Baileigh DP-1375VS-110 Inverter Drill Press clears wide 22-Inch plates using 2-HP 110V inverter drive power. You dial in speeds on a front knob. The high-draw 110V motor requires a dedicated 20-amp circuit to avoid tripping breakers during heavy cuts.
Heavy-duty cast iron forms the slotted table and rigid base, absorbing severe rotational vibration under high-load holemaking. A 2-HP induction motor connects to 110V 1-Phase power, converting line current through a digital inverter to drive variable spindle speeds from 65 to 2000 RPM. A digital display tracks real-time spindle velocity. The floor machine scales at 660 lbs, measuring 36 inches deep by 24 inches wide across its industrial concrete footprint.
Key Features of Baileigh DP-1375VS-110
Structural fabricators buy Baileigh DP-1375VS-110 drill presses to punch large holes in structural steel without needing 220V or 3-Phase power feeds. The wide twenty-two-inch work swing and heavy Morse Taper 4 spindle deliver industrial machine shop capacity on standard 110V shop outlets.
- High-output 2-HP motor runs on standard 110V 1-Phase power through an internal digital inverter.
- Front-mounted digital readout displays exact spindle RPM for precision holemaking control.
- Wide 22-Inch swing accommodates large structural weldments and broad metal sheet stock.
- Morse Taper 4 spindle socket seats heavy drill arbors and production taper-shank twist drills.
- Deep 6-Inch quill stroke handles thick billet steel drilling with positive depth stops.
- Large cast iron worktable features dual T-slots to clamp heavy milling vises without work shift.
- Automatic electronic spindle braking halts rotation upon switch off for reliable operator safety.
Inverter Spindle Runout Bench Tolerances
Bench test indicators confirm spindle nose runout stays under 0.0008 inches total indicated runout (TIR) at full extension. Driving a 1-1/2-Inch drill through 1-Inch structural steel drops spindle velocity from 350 free RPM to 342 RPM as the inverter compensates torque under load. Column flex remains under 0.003 inches under 380 lbs of manual downfeed downthrust. The variable frequency drive enclosure holds internal electronic temperatures below 118 degrees Fahrenheit during 2-Hours of continuous metal boring cycles in warm shop bays.
Shop Floor Handling Field Service
The long three-spoke downfeed handles give you solid leverage to feed large twist drills through tough metals. Skip this machine for high-speed small-hole jewelry work or soft wood routing. The 2000 RPM top speed is too slow for miniature carbine drills, and the 660-lb dead weight demands machinery skates to move. Lock the table elevation clamp lever before placing heavy steel blocks on the table.
- Clean cooling fan dust filter screens on the inverter housing monthly to stop heat trips.
- Wipe down the precision ground table with corrosion inhibitor oil after wet machining shifts.
- Lubricate the rack-and-pinion table lift gears every 6-Months with heavy open-gear grease.
Factory Warranty Standard Crate Manifest
Baileigh backs the DP-1375VS-110 drill press with a 1-Year parts warranty covering manufacturer defects. The crated factory shipment delivers the 660-lb drill press, an MT4 to MT3 spindle sleeve, a drill drift key, a safety protective eye shield, and an illustrated technical operating and programming manual.
