Description
Rip through eight-inch concrete masonry units without water lines using the iQ Power Tools King Cutter Saw. This factory-inspected demo model captures ninety-nine point five percent of dry airborne dust. A 5.5 HP electric motor powers the blade and internal cyclonic vacuum. You must empty the lower collection trays before dust compacts against internal turbine impellers.
iQ builds the chassis from aircraft-grade extruded aluminum mated to heavy powder-coated steel side panels. A 5.5 HP 230V single-phase electric motor draws 22 FLA, driving the 21.5-inch diamond blade arbor at 2300 RPM through a serpentine belt system. The saw weighs 265 lbs unboxed. Frame measurements span 43 inches long by 32 inches wide by 47 inches high, riding on solid flat-free transport tires.
Key Features of iQ King Cutter
Commercial masons buy iQ King Cutter demo units to speed production runs while tracking reduced pricing on refurbished equipment. Bricklayers cut structural cinder blocks inside finished building interiors without setting up containment walls or outdoor water pumps.
- Integrated cyclonic vacuum system captures dangerous respirable silica dust without external suction hoses.
- Large 21.5-inch diamond blade capacity executes eight-inch deep cuts in a single pass.
- Electric 5.5 HP motor provides high torque through dense stone and hard pavers.
- Rolling material table with steel roller bearings supports heavy precast architectural concrete.
- Heavy aluminum chassis resists jobsite corrosion and sheds mortar splatter with water wash.
- Filter cleaning hand wheel dislodges trapped dust cakes into collection trays in seconds.
- Soft-start electrical switch limits inrush current spikes to protect commercial jobsite power breakers.
Vacuum Airflow Spindle Runout Tolerances
Bench testing on this demo unit confirms factory-fresh mechanical tolerances across the arbor and vacuum turbines. Blade arbor runout measures under 0.0012 inches TIR at the blade mounting shoulder. Under continuous eight-inch plunge cuts through four-thousand-PSI concrete blocks, the three internal vacuum stages draw 220 CFM of air pull, holding ambient dust counts below OSHA action thresholds. Motor stator temperature reaches 136 degrees Fahrenheit after three hours of heavy block cutting. The material table exhibits less than 0.006 inches sag under three-hundred-pound slabs.
Indoor Masonry Cutting Maintenance Realities
Pushing large masonry units through the spinning blade feels smooth on the steel bearing table tracks, though lifting three-hundred-pound stone pieces requires two men on site. The sealed power switch functions positive with wet work gloves. Do not buy this dry saw for wet asphalt cutting or cutting steel beams.
- Empty the dust collection drawers when debris reaches the visual fill line.
- Turn the filter cleaner crank handle after every twenty cutting passes.
- Inspect the serpentine drive belt for rubber cracking every forty run hours.
Factory Warranty Manifest Packaging Terms
iQ Power Tools protects this demo model with a 1-Year commercial manufacturer warranty against defects. The factory crate contains the inspected King Cutter saw machine, 21.5-inch diamond blade, rolling material cart, integrated vacuum filter set, transport wheels, arbor wrench set, and the printed equipment operator manual.