Description
Slice contraction joints through cured slabs with the Edco 14-Inch Downcut Compact Saw. This walk-behind flat saw turns fourteen-inch diamond blades to plunge four and three-quarter inches deep into pavement. Downcut blade rotation pulls the machine into the cut. You must push the chassis forward by hand along straight chalk lines.
Edco fabricates the compact chassis from thick seven-gauge welded steel plate to prevent frame twist under load. An 11.7 HP Honda GX390 gas engine drives the one-inch blade arbor at 3000 RPM through dual cogged V-belts. Machine weight totals 185 lbs unboxed. Physical dimensions measure 39 inches long by 21 inches wide by 36 inches high on solid rubber transport wheels with roller bearings.
Key Features of Edco 14-Inch
Flatwork contractors buy Edco 14-inch compact downcut saws to saw sidewalk expansion joints while tracking commercial equipment pricing online. Concrete cutting crews execute control joint cuts and small asphalt trench patches without trailering heavy road machinery.
- Downcut blade rotation draws the saw forward into the kerf to reduce operator push resistance.
- Honda GX390 engine provides dependable recoil starting and steady torque in hard rock concrete.
- Fourteen-inch blade guard clears four and three-quarter inches of single-pass plunge cutting depth.
- Heavy seven-gauge steel chassis resists warping under heavy downforce in dense aggregates.
- Manual screw feed raise-and-lower crank sets exact blade cutting depth without hydraulic creep.
- Dual water spray tubes drench diamond blade segments to flush stone cuttings and suppress dust.
- Hinged front blade guard swings open for fast blade inspection and diamond segment replacement.
Blade Spindle Concentricity Load Tolerances
Bench testing on the one-inch turned and ground blade arbor confirms precision mechanical concentricity. Arbor runout measures under 0.0011 inches TIR at the blade mounting collar shoulder. Under four-inch plunge cuts through four-thousand-PSI limestone concrete, the Honda GX390 engine maintains 3450 RPM with governor drop staying under three percent. Spindle bearing housing temperatures stabilize at 132 degrees Fahrenheit after two hours of continuous sidewalk joint sawing. The rigid steel chassis exhibits zero frame deflection under operator pushing thrust.
Flatwork Sawing Ergonomics Maintenance Scope
Pushing this 185-pound compact saw along chalk lines feels balanced, with the downcut blade rotation pulling the frame forward into cuts. The screw feed crank turns smooth through thick leather gloves. Do not buy this manual push saw for long multi-mile highway projects or deep fifteen-inch structural pavement demolition.
- Grease the blade spindle pillow block bearings through grease zerks every shift.
- Check tension on the dual cogged drive belts every forty operating hours.
- Clean the cyclone engine air filter foam pre-cleaner every twenty hours.
Factory Warranty Manifest Packaging Terms
Edco covers this compact downcut saw with a 1-Year commercial manufacturer warranty against defects. The factory package contains the complete 14-inch downcut saw, blade guard, cutting depth indicator, water hookup kit, forward pointer arm, arbor wrench set, and the printed equipment operator instruction manual.