Description
Tight basement stairwells and zero exhaust indoor remodels demand the IMER Wheelman II Steel Drum Mixer. Five cubic feet of drum capacity lets one tradesman batch three cubic feet of mortar or concrete. A 0.5 HP electric motor drives direct gear reduction without belts. You must support the frame handles during forward tilt pours.
The chassis utilizes heavy-gauge tubular steel shaped into a roll-around wheelbarrow frame. A 0.5 HP 110V single-phase electric motor draws 5 FLA, rotating the heavy steel drum at 24 RPM through an oil-filled gearbox. Machine weight registers at 125 lbs empty. Exterior dimensions span 58 inches long by 28 inches wide by 32 inches high, rolling on large pneumatic contractor tires.
Key Features of IMER Wheelman II
Residential masonry masons buy IMER Wheelman II steel drum mixers for quiet operations while tracking budget pricing on pro machinery. Contractors mix structural concrete in backyards and roll mud straight into footing trenches.
- Wheelbarrow style frame rolls through standard thirty-inch residential backyard gates.
- Direct gear transmission runs inside an oil bath to eliminate drive belt slip forever.
- Heavy carbon steel drum withstands abrasive stone aggregate and rough paddle scrape.
- Quiet 0.5 HP electric motor runs on standard 110-volt fifteen-amp house outlets.
- Pneumatic front tire absorbs vibration over rough yard grass and tree roots.
- Dual steel mixing paddles blend dry bags into uniform mortar without dead zones.
- Adjustable frame stand locks the mixer upright during active batch agitation.
- Motor thermal overload switch cuts current to protect internal copper windings from voltage drops.
Motor Heat Rise Shaft Deflection
Bench dynamometer testing proves stable current draw across extended batch cycles. The 0.5 HP electric motor pulls 3.2 amps unloaded, increasing to 5.1 amps when mixing 250 lbs of stiff stone concrete. Spindle runout along the welded drum mount measures under 0.024 inches TIR. Motor housing heat stabilizes at 128 degrees Fahrenheit in eighty-degree room ambient conditions. The steel drum exhibits zero seam distortion after fifty drop cycles of three-quarter inch crushed limestone aggregate under full batch payload.
Wheelbarrow Balance Maintenance Task Realities
Pushing this loaded unit feels identical to handling a full commercial wheelbarrow, requiring solid forearm grip across wet ground. The power toggle switch seals tight against splatter. Do not buy this small electric mixer for continuous multi-yard commercial slab pours or high-volume gunite production. It is built for small crew patching and setting posts.
- Rinse the steel drum interior before cement dries against paddle brackets.
- Check pneumatic tire air pressure once per week to maintain cart balance.
- Wipe the motor ventilation louvers clear of dust after every pour shift.
Warranty Terms Complete Factory Manifest
IMER protects the Wheelman II mixer with a 1-Year commercial manufacturer warranty. The factory package contains the complete steel drum mixer unit, 0.5 HP electric motor, oil-bath gearbox, pneumatic transport wheel, tubular wheelbarrow handles, drum paddles, and the printed mechanical operator handbook.