Description
Four point two five cubic feet of batch volume churns dense repair mortar inside the IMER Mix 120 Plus Electric Mixer. An enclosed vertical shaft spins three paddle arms to fold bagged materials fast. The patented iDust vacuum grate suppresses airborne silica dust. You must clean the bottom dump chute opening after every single batch pour.
The frame uses heavy structural steel tubing with high-impact polymer protection panels. A 1.5 HP 110V single-phase electric motor draws 15 FLA, turning the vertical paddle shaft at 38 RPM through a high-efficiency oil-bath gearbox. The complete unboxed unit weighs 286 lbs. Physical dimensions measure 33 inches wide by 35 inches long by 50 inches high, rolling on large twelve-inch flat-free transport tires.
Key Features of IMER Mix 120 Plus
Restoration specialists buy IMER Mix 120 Plus machines to meet strict OSHA silica rules while tracking competitive pricing on commercial mixers. Crews blend structural repair mortars and epoxy grouts right inside occupied hospitals.
- Specialized iDust grate connects to vacuums to trap dangerous airborne cement dust clouds.
- Three-paddle forced action system shears high viscosity mortar without leaving dry powder.
- Bottom discharge slide hatch empties mixed batches straight into buckets or wheelbarrows.
- Thermal overload motor breaker prevents stator burnout during low voltage extension cord runs.
- Roll-on loading bars allow one tradesman to pivot the machine into pickup beds.
- Sealed oil-bath transmission requires zero belt tensioning or chain grease maintenance.
- Removable bag splitter grid cuts paper sacks open with one downward slam.
Drive Torque Bearing Load Tolerances
Bench stress tests record massive rotational torque through the vertical output shaft. The 1.5 HP electric motor pulls 5.8 amps running empty, jumping to 14.6 amps under a 250-pound payload of dense masonry repair mortar. Vertical shaft runout measures less than 0.009 inches TIR under loaded paddle resistance. Transmission case heat reaches a steady 138 degrees Fahrenheit after four hours of non-stop batch runs. The iDust vacuum port draws 96 percent of fugitive silica dust under 130 CFM shop vacuum airflow.
Indoor Handling Upkeep Application Scope
Rolling this upright unit through 36-inch commercial doors is direct, though loading into truck tailgates demands two workers using the built-in skid bars. The bottom dump lever operates crisp with gloved hands. Do not buy this vertical shaft mixer for large coarse gravel concrete containing three-quarter inch rock. It handles mortars, grouts, and polymer mixes.
- Scrape the vertical paddle blades clean before Portland cement cures hard.
- Check gearbox oil levels through the brass sight plug twice per year.
- Wipe the iDust vacuum collar screen clean of caked dust after each shift.
Factory Warranty Manifest Package Scope
IMER backs the Mix 120 Plus with a 1-Year commercial manufacturer warranty. The factory wooden crate includes the vertical shaft mixer, iDust vacuum collection grate, bag splitter blade, three-arm paddle set, flat-free transport tires, electrical power cord, and the printed mechanical safety operations manual.