Description
Struggling to hit Proctor density specs inside tight pipe trenches? Put the Husqvarna LT6005 Four-Stroke Rammer to work on your site. This compact rammer delivers 3372 lbs of impact force to pack cohesive silt and clay. A Honda engine powers the percussion leg. You must drain carburetor fuel before storing the machine for winter.
Husqvarna constructs the lower leg from cast ductile iron bolted to a nine-inch wear-resistant laminated wooden and steel shoe. A 3.6 HP Honda GXR120 four-stroke gas engine drives the percussion mechanism at 720 blows per minute through multi-stage coil springs. Unboxed machine weight totals 154 lbs. Outer dimensions span 29 inches long by 14 inches wide by 40 inches high with anti-vibration handles.
Key Features of Husqvarna LT6005
Utility contractors buy Husqvarna LT6005 rammers to compact trench backfill around culverts while checking pro pricing on commercial compaction equipment. Crews tamp cohesive soil in narrow excavations without damaging buried plastic electrical conduit.
- Honda GXR120 overhead cam engine delivers dependable starting torque without oil premixing.
- Nine-inch narrow shoe fits between tight pipe clearances and ditch wall obstructions.
- Laminated wood and steel shoe absorbs violent shock rebound to protect internal gears.
- Three-position throttle control integrates engine stop, idle, and full compaction run speeds.
- Dual air filtration system prevents fine silica dust from scoring engine cylinder walls.
- Vibration-isolated guide handle cuts hand-arm strain during extended shift runs.
- Balanced transport roller bar enables one worker to roll the rammer into pickup beds.
- Cast iron crankcase housing resists abrasive soil strikes and trench cave-in impacts.
Percussion Velocity Impact Energy Tolerances
Bench calibration tests prove steady percussion energy across varied soil profiles. The Honda GXR120 engine maintains 3600 RPM under load, delivering 720 percussion blows per minute with stroke travel reaching 2.7 inches. Piston guide runout measures under 0.007 inches TIR within the sealed oil leg. Crankcase temperatures stabilize at 138 degrees Fahrenheit after four hours of non-stop compaction testing. Handle vibration dampers isolate hand-arm acceleration down to 6.4 meters per second squared on dense clay soil backfill.
Narrow Trench Handling Maintenance Scope
Guiding this 154-pound rammer along narrow ditch floors feels nimble thanks to the slim nine-inch shoe profile, advancing on its own momentum. The throttle switch operates crisp with thick leather gloves. Do not buy this machine for asphalt surface paving or open gravel roadway spreads. It belongs on cohesive soils.
- Check engine oil levels through the dipstick before every work shift.
- Inspect lower leg oil levels through the sight glass once per month.
- Clean air filter elements with compressed air every twenty operating hours.
Factory Warranty Terms Pallet Inclusions
Husqvarna covers the LT6005 with a 1-Year commercial manufacturer warranty. The factory package contains the complete LT6005 vibratory rammer machine, Honda GXR120 gas engine, nine-inch laminated shoe, transport roller handle, spark plug service tool, and the comprehensive printed equipment operator instruction manual.