Description
Comply with indoor OSHA carbon monoxide rules inside utility vaults using the Milwaukee MX FUEL 70kg Rammer Kit. This battery-powered jumping jack produces 3600 lbs of impact force to consolidate cohesive clay. A brushless electric motor operates without gas fumes. You must recharge the REDLITHIUM battery packs between extended soil compaction shifts.
Milwaukee constructs the percussion drive from cast ductile iron bolted to an eleven-inch wear-resistant steel shoe. The POWERSTATE brushless electric motor draws current from an MX FUEL REDLITHIUM FORGE battery pack, delivering 680 blows per minute. Total operating weight measures 154 lbs with battery installed. Machine dimensions measure 28 inches long by 14 inches wide by 41 inches high with vibration-dampened handles.
Key Features of Milwaukee MX FUEL
Pipelayers buy Milwaukee MX FUEL rammer kits to eliminate gas storage hazards while tracking pro commercial equipment pricing. Trench crews compact clay backfill inside enclosed basements without setting up gas exhaust fans.
- POWERSTATE brushless motor delivers zero emissions for safe compaction inside enclosed utility trenches.
- REDLITHIUM FORGE battery packs deliver gas-equivalent hitting power through extended compaction runs.
- Rugged eleven-inch steel shoe shatters dense clay clumps to achieve structural soil compaction.
- Push-button start eliminates stubborn recoil cord pulling in freezing winter construction conditions.
- ONE-KEY digital tracking provides tool location tracking and inventory management through smart devices.
- Vibration-isolated guide handle cuts hand-arm strain during extended shift trench backfilling.
- Balanced transport roller bar allows one worker to roll the rammer into truck beds.
Impact Energy Percussion Stroke Tolerances
Bench testing proves steady percussion energy across the entire battery discharge curve. The brushless motor delivers 3600 lbs of impact force, maintaining 680 blows per minute on stiff cohesive clays until battery capacity drops under five percent. Spring cylinder stroke measures 2.6 inches with rod deflection holding under 0.007 inches TIR. Gearcase operating temperatures level off at 124 degrees Fahrenheit under full load compaction runs. Guide handle isolation mounts cut hand-arm acceleration down to 2.8 meters per second squared.
Trench Maneuvers Battery Maintenance Realities
Guiding this 154-pound rammer down utility trenches is straightforward, as the machine walks forward on its own percussion rhythm. The glove-friendly start button actuates positive in freezing weather. Do not buy this battery rammer for open highway asphalt paving or large four-inch rock base compaction. It is built for cohesive trench backfill.
- Wipe fine sand and mud off battery contact terminals after every shift.
- Check rammer shoe mounting bolts with a torque wrench every twenty hours.
- Inspect the spring cylinder oil level in the sight glass once per month.
Factory Warranty Manifest Packaging Terms
Milwaukee covers the MX FUEL rammer with a 2-Year commercial manufacturer warranty. The factory package contains the MXF270 rammer machine, two MX FUEL REDLITHIUM FORGE battery packs, one MX FUEL charger, eleven-inch steel shoe, transport roller bar, and the printed mechanical equipment operator instruction manual.
