Description
OSHA respirable crystalline silica standards require source-capture vacuum extraction on all concrete cutting and core drilling operations. The Husqvarna DE 130 H Dust Extractor captures toxic silica dust at 241 CFM to satisfy safety rules. It draws 15 amps on 110V power, requiring a dedicated 20-amp commercial breaker line to avoid tripping under heavy tool loading.
High-impact engineering composite plastic constructs the cylindrical canister housing, structured with an aluminum pull frame and steel latches. A continuous-duty electric bypass motor draws 15 full-load amps on standard 110V 60Hz single-phase wall circuits, outputting 2.0 HP. Total dry bare tool weight measures 58 lbs. Machine dimensions measure 31 inches long, 20 inches wide, and 36 inches tall on large non-marking rubber wheels.
Key Features of Husqvarna DE 130
Cutting contractors buy Husqvarna DE 130 H extractors to capture silica dust behind power cutters, core drills, and floor grinders. Equipment pricing delivers certified HEPA suction that complies with strict OSHA silica regulations.
- High-efficiency bypass electric vacuum motors generate 241 CFM of volume flow and 88 inches of static water lift.
- Certified primary HEPA filtration media captures 99.99 percent of dangerous respirable silica dust down to 0.3 microns.
- Conical cyclone separation chambers drop ninety percent of concrete dust into bags before hitting filter media.
- e-flow filter monitoring systems adjust motor power automatically to maintain steady CFM suction as dust accumulates.
- Auto-pulse filter cleaning systems clear dust cakes from filter cartridges without opening the vacuum canister.
- Continuous Longopac plastic collection bag systems allow dust disposal without worker exposure to silica dust.
- Large non-marking flat-free rubber wheels roll over rough broom-finished concrete slabs, curbs, and dirt berms.
Vacuum Static Suction Bench Metrics
Vacuum bench testing confirms 241 CFM of volume flow and 88 inches of static water-gauge lift at the hose intake port. The bypass motor draws 14.6 running amps on 110V circuits under full suction load without motor overheating over eight continuous hours. Automated reverse-pulse cleaning mechanisms clear fine concrete dust cakes every fifteen seconds, maintaining steady airflow volume. Operating sound meter tests record 72 dB at six feet away. Gaskets maintain airtight canister seals up to 95 inches of vacuum pressure.
Floor Prep Usability Realities Maintenance
Rolling this 58 lb vacuum over broom-finished concrete takes one worker pulling the metal push handle. The low-profile tank latch unclips with two hands to empty concrete dust into site dumpsters. Do not buy this dry extractor for continuous wet slurry pumping, combustible wood chips, or flammable chemical vapors.
- Pulse the filter cleaning mechanism before turning off the power switch after each grinding run.
- Tie off and replace the continuous Longopac collection bag before concrete dust exceeds 40 lbs.
- Inspect the rubber intake hose gaskets and wand couplers for suction leaks every week.
Factory Warranty Manifest Inclusions
Husqvarna covers this dust extractor with a 1-Year commercial manufacturer warranty against defects in motor and electronics. The shipping carton delivers the DE 130 H vacuum, sixteen-foot anti-static suction hose, HEPA filter cartridge, Longopac bag roll, floor tool wand, and an OSHA compliance operations manual.