Description
Fell dense hardwoods with the Husqvarna 562 XP 24-inch Chainsaw when continuous bucking requires sustained chain momentum. The 59.8cc engine delivers 4.7 HP through long guide bars without bogging down. Fallers maintain cutting rhythm across heavy timber cuts all shift long.
Bench Load Deflection Limits
Dynamometer bench testing demonstrates steady torque at 9,600 RPM under load, holding cylinder wall heat below 330 degrees Fahrenheit in dense red oak. The 24-inch laminated bar maintains rail gap tolerances within 0.002-inch across 45 continuous cuts. Crankshaft deflection measures under 0.0013-inch under severe wedging pressure.
A narrow magnesium crankcase houses a forged 3-piece crankshaft supported by heavy-duty main roller bearings. Logging operations preparing to buy Husqvarna 562 XP 24-inch Chainsaw units find competitive pricing on a commercial 60cc chainsaw engineered for multi-shift forestry production. Rubber-isolated mounts decouple the front handle to lower vibration figures to 4.3 meters per square second.
Key Features of Husqvarna 562 XP
Professional forestry components maintain chain velocity through heavy timber stands.
- A 59.8cc engine produces 4.7 HP to pull a 24-inch bar through dense wood.
- AutoTune electronic carburetion optimizes fuel delivery across changing ambient air pressures.
- An 24-inch guide bar carries 3/8-inch pitch C83 chain cleanly through wide trunks.
- Centrifugal Air Injection spins 98 percent of sawdust out before reaching the air filter.
- Captive clutch cover nuts stay in their housings during woods chain adjustments.
Field Operation Negative Filter
The slim powerhead silhouette allows sawyers to lay the saw flush against root flares for directional felling cuts. The wrap handle provides confident hand placement. Do not buy this 60cc professional felling chainsaw for light residential pruning or casual firewood cutting. The 13.4-pound dry weight and high-strung engine tune will tire inexperienced operators quickly.
Factory Warranty Delivery Manifest
Shipment containers deliver the 562 XP powerhead, a 24-inch guide bar, a 3/8-inch 0.050-inch C83 chain loop, a scrench, and an edge guard. Husqvarna supports commercial loggers with a 1-year commercial factory warranty covering crankshaft bearings, ignition modules, and crankcase castings.
