Description
Twin V-belts transmit eleven-point-seven gas horsepower straight from the engine crankshaft down to the diamond arbor the moment you push the throttle forward. The ICS M130 Flat Saw delivers industrial flatwork sawing across cured concrete slabs and asphalt patches. A Honda engine drives fourteen-inch blades down to four-and-three-quarter inches. Cutting uphill pavement grades demands substantial worker push stamina.
Heavy-gauge structural plate steel forms the unibody box frame, preventing frame deflection and blade binding inside deep pavement joints. The 11.7 HP Honda GX390 four-stroke engine operates at 3,600 RPM, delivering mechanical power to the arbor through dual cogged belts. Bare saw weight sits at 205 lbs, presenting a 36 by 21 by 38 inch footprint that fits inside standard utility truck beds.
Key Features of ICS M130
Commercial flatwork contractors and municipal asphalt crews run this flat saw for expansion joints, bridge deck scoring, and pipe trenches. Inquire with authorized industrial dealers for pricing to buy ICS M130 saws for heavy road maintenance tasks.
- Honda GX390 commercial engine supplies raw power to slice hard river gravel concrete.
- Box-welded steel chassis maintains true alignment to eliminate blade pinch inside joints.
- Acethread screw feed mechanism sets and locks cutting depth with mechanical accuracy.
- Heavy-duty cast iron pillow block bearings support the arbor shaft under downforce loads.
- Polyurethane water distribution manifold sprays equal fluid streams across blade cores.
- Pointer guide wheel drops down to track layout chalk marks across wide slab bays.
- Vibration-damped handlebar adjusts to three heights to fit different operator stances.
- Heavy steel lifting bail welded to the top frame simplifies crane rigging and transport.
Arbor Runout Dyno Load Metrics
Arbor spindle runout tests within 0.0009 inches TIR across the heavy blade mounting flange. Free engine speed measures 3,600 RPM, settling at 3,420 RPM under full four-inch plunge cuts in cured structural concrete. Frame deflection measures less than 0.004 inches under aggressive downward screw feed pressure. Twin cogged drive belts exhibit zero slip when tensioned to manufacturer specifications. Exhaust gas temperatures stabilize near 415 degrees Fahrenheit during uninterrupted highway shoulder trenching operations in summer heat.
Jobsite Handling Crew Service Realities
The balanced 205-pound chassis tracks straight with light steering pressure along chalk joint lines on cured slabs. The throttle control and emergency engine stop toggle mount within direct thumb reach on the console. Do not buy this machine for vertical wall cutting or indoor crawlspace trenching. Highway maintenance teams and commercial slab contractors extract maximum daily utility from this machine.
- Lubricate arbor shaft pillow block bearings with lithium grease every twenty hours.
- Inspect and adjust drive belt tension after the first eight hours of operation.
- Flush dry slurry deposits out of the water manifold passages each day.
Factory Crate US Warranty Details
ICS backs the M130 flat saw with a 1-Year limited commercial warranty covering the chassis, arbor bearings, and mechanical drivetrain. The wooden shipping crate contains the M130 saw assembly, pointer bar, arbor wrench set, and Honda engine manual. Fourteen-inch diamond blades and engine crankcase oil ship separately.