Description
Delivering 4.0 CFM at 90 PSI, the Eagle Silent Series 4-Gallon Compressor powers finish nailers and staple guns across residential remodel jobsites with an ultra-quiet 60 dBA sound rating. The 1.0-horsepower low-RPM electric motor powers an oil-free dual-cylinder pump across dual horizontal steel tanks up to 125 PSI. Finish carpenters work indoors without disturbing residential clients. The 4-gallon tank requires brief recovery pauses when running continuous high-CFM air tools.
Key Features of Eagle EA-4000
Finish carpenters and cabinet installers buy Eagle Silent Series 4-Gallon Compressors to complete punch-out trim work inside occupied residential homes. Compare commercial quiet portable air compressor pricing to equip your finish carpentry crew with ultra-quiet pneumatic power.
- Ultra-quiet 60 dBA operational sound rating allows trim installation inside occupied homes without hearing protection cleanly.
- Low-RPM 1700 RPM motor runs cooler and lasts longer than screaming 3450 RPM direct-drive competitor units cleanly.
- Oil-free dual-cylinder pump delivers 4.0 CFM at 90 PSI, requiring zero oil changes and preventing wood surface stains.
- Dual horizontal steel tanks store four gallons of air, buffering pressure drops during rapid trim finish nailing cleanly.
- All-steel roll cage frame wraps around the pump, motor, and gauges to protect components from severe jobsite impacts.
- Dual brass quick-connect couplers allow two operators to run air hoses simultaneously off a single compressor cleanly.
Precision-machined aluminum forms the dual-cylinder pump block, featuring Teflon-coated piston rings that eliminate crankcase oil maintenance and wood surface staining. A heavy-duty tubular steel roll cage protects the motor shroud, pressure switch, and brass manifold gauges from jobsite tip-overs. Sized for residential finish work, the portable compressor weighs 48 lbs, measuring 19 inches long, 16 inches wide, and 15 inches high, featuring non-marking rubber feet that prevent floor vibration scuffs.
Acoustic Sound Bench Damping Limits
Acoustic sound meter testing confirms an operational noise rating of 60 dBA at one meter distance, allowing normal conversation directly beside the operating unit. Pneumatic bench testing confirms delivered air volume measures 4.0 CFM at 90 PSI and 5.0 CFM at 40 PSI, supporting two finish carpenters firing brad nailers and crown staplers at production speeds cleanly. Tank pump-up from zero to 125 PSI cut-out takes 85 seconds, with recovery cycle time from 90-PSI cut-in to 125-PSI cut-out clocking at 24 seconds.
Trim Remodeling Negative Selection Filter
The cushioned center carry handle balances the forty-eight-pound tool comfortably in one hand during room-to-room punch lists. Do not buy this quiet finish compressor for production framing crews running three framing nailers simultaneously, continuous sandblasting, or high-volume paint spray guns requiring continuous high CFM.
- Open the bottom brass tank drain valve daily after work to purge accumulated water condensation.
- Inspect air hose quick-disconnect O-rings for cracking or air leaks before connecting pneumatic nailers.
- Blow airborne drywall and sawdust out of the cooling motor shroud vents weekly using an air blow gun.
Factory Warranty Delivery Manifest
Eagle Compressor covers this Silent Series portable air compressor with a 1-Year limited manufacturer warranty against motor failures, pump component defects, and pressure switch circuitry. The factory shipment box contains one assembled 4-gallon quiet compressor, brass couplers, and an illustrated technical instruction manual.
