Description
Consolidate crushed stone subbase with the Wacker Neuson BPS1550B Vibratory Plate across curb installations and paver walkways. A four-stroke gas motor drives the eccentric housing to generate 3372 pounds of centrifugal compaction force. Forward-only travel requires physical effort to spin the machine around in dead-end corners because it lacks a reverse gear mechanism.
High-strength nodular cast iron forms the 19.7-inch base plate, curved at the edges to eliminate track gouges on hot asphalt mats. A four-stroke overhead-valve gasoline engine produces 5.0 gross horsepower at 3600 RPM with low-oil shutoff protection. Power transfers from crankshaft to exciter shaft through an enclosed V-belt drive within a ventilated cover. Net unboxed weight measures 181 lbs with a physical footprint of 19.7 inches wide by 38 inches long.
Key Features of Wacker Neuson BPS1550B
Landscaping crews buy Wacker Neuson BPS1550B plates to seat sand beds for interlocking pavers, asphalt patches, and footing trenches. Check commercial forward vibratory plate pricing before outfitting field crews with dependable base compaction tools.
- Curved nodular cast iron wear plate glides over asphalt without digging sharp edges
- Industrial four-stroke gasoline engine delivers dependable pull-start ignition in freezing morning temperatures
- High centrifugal output of 3372 pounds compacts aggregate subbase on fewer passes
- Vibration isolated guide handle holds hand-arm vibration below 2.5 meters per second squared
- Integrated lifting bar balances tool center of gravity for hoist chain rigging
- Enclosed drive belt cover blocks gravel grit and sand from chewing pulleys
- Compact 19.7-inch footprint navigates tight pathways and confined foundation perimeter footing cuts
Dynamic Bench Load Vibration Tolerances
Bench testing confirms an operating frequency of 98 Hertz delivering 3372 pounds of centrifugal force across dense granular base beds. Forward advance speed averages 85 feet per minute on compacted crushed stone. Exciter shaft runout checks below 0.001 inches TIR at the drive pulley interface. Drive belt slip remains under two percent at rated operating speed. Bearing housing temperatures level off at 138 degrees Fahrenheit after three hours of bench testing, proving effective heat transfer through the ductile iron base plate.
Field Usability Daily Maintenance Points
Tuned handle mounts isolate engine harmonics, keeping hand fatigue minimal during ten-hour pavement jobs. Do not purchase this forward-only plate for deep utility ditch backfills exceeding twelve inches per lift or sticky clay retaining wall projects where heavy diesel plates dominate.
- Check exciter casing oil level through the threaded sight port every one hundred hours
- Wash the engine foam air filter element with solvent after eight hours of work
- Inspect drive belt tension by thumb deflection every fifty hours to stop pulley slip
Factory Warranty Pallet Inventory Specs
Wacker Neuson covers this vibratory compactor with a 5-Year commercial manufacturer warranty on chassis castings, exciter mechanisms, and guide handles. The shipping pallet includes one assembled BPS1550B plate compactor, a steel spark plug wrench, an official gas engine operator manual, and factory warranty registration paperwork.