Description
Rotating pipe on powered drive rollers while forcing a sharp cutter wheel inward defines the Ridgid PTC-400 Power Tubing Cutter. This portable corded machine slices 1/2-inch to 4-inch copper, stainless steel, and plastic tubing with pure squareness. It eliminates crooked hand cuts. The cutter wheel requires manual feed lever pressure to advance.
A cast aluminum base frame supports heavy-duty steel roller shafts, housed in an impact-resistant polymer motor enclosure. A 120-volt AC universal motor draws 5.8 full-load amps, delivering seven hundred five watts of cutting power at four hundred fifty roller RPM. The tool weighs 32 lbs, measuring 17.5 inches long by 11.2 inches wide. Its compact footprint sits on workbenches or mounts to tri-stand pipe vises.
Key Features of Ridgid PTC-400
Commercial mechanical contractors buy Ridgid PTC-400 cutters to accelerate stainless steel and copper tubing rough-ins on hospital and laboratory projects. Competitive power tubing cutter pricing delivers clean cold-cutting precision that saves hours of fitting prep labor.
- Powered drive rollers turn tubing from 1/2-inch to 4-inch diameter for clean square cuts.
- Seven hundred five watt electric motor supplies steady torque through thick-wall stainless tubing.
- Cold cutting action generates zero sparks, zero flames, and zero hot metal debris.
- Quick-feed lever mechanism advances the cutter wheel into tubing without complex manual adjustments.
- Sealed roller ball bearings withstand wet jobsite pipe cutting slurry without seizing up.
- Top carrying handle balances tool weight for one-person transport between mechanical rooms.
- Compatible with Ridgid pipe stands for stable elevated shop floor cutting positions.
Tubing Squareness Bench Test Calibration
Dial indicator testing confirms drive roller runout under 0.0009 inches total indicator reading at full roller speed. Across two-inch Schedule 10 stainless steel tubing, severance time averages 14 seconds with cut face squareness holding within 0.012 inches. The cut edge shows zero heat tinting or metallurgical changes, leaving tubing ends ready for press fittings. Motor casing temperature climbs twenty-four degrees Fahrenheit after thirty minutes of continuous pipe cuts. Roller grip knurling exhibits zero slippage against wet copper surfaces under full cutting pressure.
Mechanical Usability Routine Maintenance Directives
The mechanical feed screw lever provides smooth control over cutting depth with gloved hands. Clamping mechanisms adjust without specialty tools. However, do not purchase this power tubing cutter for heavy Schedule 80 steel pipe, ductile iron water lines, or concrete-lined conduit.
- Clean metal chips and water slurry from the roller shafts after every cutting shift.
- Inspect the cutter wheel cutting edge once a week for nicks or flat spots.
- Lubricate the cutter wheel feed screw threads once a month with light machine grease.
Factory Warranty Machine Manifest
Ridgid protects this portable tubing cutter with a Lifetime warranty against defects in materials and structural workmanship. The factory shipment contains the PTC-400 power tubing cutter, copper and stainless cutter wheels, a hex wrench, and technical operator instruction documentation. Pipe stands require separate purchase.