Description
Dumping heavy 20-gallon wastewater vacuums into elevated janitorial sinks causes worker shoulder strains and spills chemical slurry across hallways. The NaceCare Solutions WV 1800DH K-8026607 20 Gallon Wet Pump-Out Vacuum with Continuous Pumping and C3A Toolkit – 1200W empties collected water continuously through a discharge hose. It holds 20 Gallons under 1200 Watt power. Pumping thick viscous sludge slows liquid discharge rates.
The recovery vessel utilizes heavy-gauge Structofoam composite that combines structural strength with complete chemical immunity to acids and floor strippers. A commercial 1200 Watt bypass vacuum motor generates deep waterlift suction to pull heavy slurry through wide hoses. An internal high-flow submersible pump pushes collected wastewater continuously out through a dedicated discharge port.
Continuous Discharge Slurry Pumping Matrix
An internal discharge pump empties wastewater continuously while the vacuum motor pulls liquid off the floor, eliminating stops to dump tanks. The C3A tool kit includes premium stainless steel wands and professional floor squeegees.
- 20 Gallon Structofoam composite canister withstands punishing mechanical shocks and harsh floor strippers.
- 1200 Watt commercial bypass vacuum motor produces 90 inches of waterlift suction for slurry recovery.
- Internal continuous submersible pump empties wastewater out through a discharge hose while vacuuming.
- Heavy-duty tubular steel cart features large rear transport wheels and an ergonomic push handle.
- Dual-action operation vacuums and discharges water simultaneously without stopping to dump tanks.
- C3A commercial contractor toolkit includes a 10-foot hose, stainless steel wands, and floor squeegee.
- Rear dump hose allows operators to empty dirty wastewater straight into floor drains without tank lifting.
Continuous Vacuum Pump Bench Telemetry
Operating both the vacuum motor and the internal discharge pump simultaneously draws 12.2 Amps from a standard 120 Volt circuit. Motor housing temperature stabilizes at 134°F after 45 minutes of continuous flood water extraction. Internal pump discharge rate delivers 8.0 GPM through a 50-foot hose at 10 feet of head. Operating acoustic sound registers 74 dBA at five feet.
Flood Restoration Scope Field Directives
Water restoration contractors, plumbing service crews, and facility maintenance teams pump flood water fast with this dual-action vacuum. Do not use the internal discharge pump to move heavy sand slurries or drywall paste because abrasive grit will ruin pump impellers. Never vacuum combustible solvents or fuel residues.
- Flush the internal pump and recovery tank with clean water after pumping dirty flood wastewater.
- Clean the internal pump intake filter screen of hair and carpet fibers after each flood job.
- Wipe down the floor squeegee rubber blades and inspect for edge gouges after each shift.
Commercial Warranty Equipment Shipment Roster
NaceCare Solutions backs this continuous pump-out vacuum with a 2-Year commercial warranty covering the vacuum motor, internal pump, and Structofoam tank. The shipment includes the 20 Gallon vacuum, steel cart, C3A tool kit, 10-foot suction hose, and discharge hose.
