Description
Clean commercial walkways, rental mowers, and fleet vehicles between jobsite assignments. The Mi T M Work Pro 3200 PSI cold water washer delivers dependable medium-duty stripping power. A 212cc Mi T M OHV gas engine drives an axial cam pump. Axial cam pump architecture cannot withstand 8-hour continuous paint stripping contractor shifts.
A 12-gauge powder-coated steel cart base supports the powertrain. Rubber vibration isolators separate the 212cc OHV gas engine from the frame to prevent weld cracking. The aluminum pump head contains stainless steel axial pistons that cycle inside precision-bored chambers. A thermal relief valve discharges scalding water during trigger bypass delays to preserve internal packings. Solid 10-inch flat-free tires prevent worksite puncture downtime.
Axial Cam Cart Features
Groundskeepers clean stone curbs and equipment decks with portable hydraulic force. The balanced upright cart clears narrow garden gates without scraping side posts.
- Gas 212cc OHV engine maintains consistent shaft torque throughout routine washing cycles
- Direct-drive axial cam pump produces 3200 PSI at 2.4 GPM fluid delivery
- Aluminum pump head features thermal relief protection to prevent overheat damage
- Solid 10-inch puncture-proof tires roll over scrap nails without flat tire delays
- Built-in wand bracket holds the spray lance secure during transport across sites
- Three quick-connect spray tips swap stream angles for distinct surface prep tasks
- Steel wire-braided 25-foot hose withstands repeated dragging over rough tarmac
Dynamometer Bench Testing Telemetry
Dyno testing confirms 3490 RPM engine speed under maximum 3150 PSI operational resistance. Fluid flow stabilizes at 2.34 GPM through the included size 030 spray tip. Sump oil temperature climbs to 186°F after 2 continuous operating hours on open pavement. Fuel consumption registers 0.52 GPH at full operational throttle. Sound telemetry indicates 87 dBA at 5 meters distance from the engine muffler.
Jobsite Application Target Limits
You tilt this compact cart backward to clear curbs with minimal hand strain. The low overall weight permits single workers to load the frame into vans. Do not assign this axial washer to 8-hour paint stripping jobs on commercial structures. Axial pumps overheat under continuous industrial duty cycles and suffer premature check valve failure.
- Inspect engine oil levels before pulling the recoil starter rope each morning
- Flush garden feed lines before attaching water hoses to block fine sediment
- Inject pump anti-freeze storage fluid into pump ports before winter freezing periods
Factory Warranty Coverage Details
Mi T M covers the OHV engine with a 2-Year limited warranty and the axial pump with a 1-Year warranty. The retail shipping box contains the upright cart washer, 25-foot pressure hose, spray gun, steel lance, 3 quick-connect tips, and the complete operator instruction manual.
