Description
Extract embedded soil from commercial tile and low-pile carpeting using this Clarke MA10 12E Complete 12″ Corded walk-behind scrubber. Powered by 120V line current, this compact machine combines a high-speed cylindrical scrub head with an off-aisle carpet extraction wand. Operators must sweep loose debris before scrubbing to prevent suction squeegee blockages.
Impact-resistant rotomolded polyethylene houses the 0.8-gallon solution and 1-gallon recovery tanks, withstanding caustic floor chemicals and jobsite strikes. An aluminum chassis secures the 800W vacuum motor and 200W brush motor. The 12-inch cylindrical nylon brush turns at 2100 RPM, delivering 26 lbs of scrub down-pressure. The bare unit weighs 26.5 lbs, features a 40-foot detachable power cable, and rolls on 4-inch non-marking rubber wheels.
Key Features of Clarke MA10
Custodial managers buy Clarke MA10 scrubbers to replace slow mop buckets without paying high walk-behind battery machine pricing. This commercial upright floor scrubber provides continuous chemical dosing and instant vacuum pickup across restaurant dining floors.
- A 12-inch cylindrical scrub brush spins at 2100 RPM to scour tile grout channels on commercial floor scrubber passes.
- Twin 12.6-inch polyurethane squeegees collect dirty wash water during forward and reverse walk-behind scrubber passes.
- Off-floor carpet extraction wand attachment connects to an 800W vacuum motor for commercial carpet cleaning.
- Low 4-inch deck clearance slips beneath dining booths on compact upright floor scrubber runs.
- Removable 0.8-gallon solution and 1-gallon recovery tanks enable quick sink refills on janitorial cleaning shifts.
- Detachable 40-foot grounded safety cable supplies 120V power across large commercial floor scrubber areas.
- Manual two-position solution metering switch regulates chemical detergent flow across hard surface floors.
Suction Flow Bench Testing Telemetry
Technicians mount each scrubber to our test bench to evaluate airflow metrics and motor amperage under load. Vacuum transducers register 75 inches of static water lift through the sealed recovery lid at 120V. Electrical meters show 7.5-Amps draw under full brush contact on textured quarry tile. The cylindrical head maintains 2100 RPM without bogging during heavy grease cutting tests. Squeegee shoes achieve complete fluid pickup, leaving VCT flooring dry to the touch within sixty seconds. Operating sound levels hold at 72 dBA.
Field Operation Directives Negative Filter
Step on the foot pedal to lower the brush deck and squeeze the handle triggers to start chemical application. Connect the vacuum hose and wand for carpet spot extraction tasks. Do not buy this 12-inch compact upright scrubber for expansive warehouse distribution centers or industrial aircraft hangars.
- Flush clean water through the 0.8-gallon recovery tank baffles after each commercial floor scrubber shift.
- Remove the 12-inch cylindrical scrub brush roller once a week to clear string from walk-behind scrubber drive pins.
- Wipe dual 12.6-inch polyurethane squeegee blades clean to prevent water streaks on upright floor scrubber passes.
Commercial Warranty Box Contents Manifest
Your purchase includes a 1-Year commercial warranty covering electric vacuum blowers, brush motors, and molded polyethylene tanks. The factory packaging holds the upright scrubber, white cylindrical scrub brush, dual squeegees, complete carpet care wand hose kit, detachable 40-foot power cord, and an operator manual.