Description
Melt severe grease, asphalt residues, and heavy road grime from earthmoving equipment. The Hot Sting 3500 PSI 4.0 GPM gas hot water machine delivers brutal thermal cleaning force. A 389cc commercial gas engine powers an industrial triplex pump. Upright heating coil weight makes manual loading dangerous without forklift equipment.
Welded 1.25-inch square steel tubing creates the heavy cart frame, coated with industrial powder finish. A commercial 389cc Honda GX390 gas engine couples directly to an industrial triplex plunger pump. Solid ceramic plungers operate within a forged brass manifold to resist chemical wear. Half-inch schedule 80 steel pipe winds through the diesel burner chamber. Pneumatic tires cushion the frame.
Hot Water System Mechanical Specs
Contractors remove thick petroleum grease without using costly industrial solvent chemicals. High water volume combined with boiling temperature shears grease off machinery frames.
- Commercial 389cc Honda engine delivers dependable crankshaft power during heavy wash shifts
- Direct-drive triplex plunger pump produces 3500 PSI at 4.0 GPM scouring flow
- Vertical diesel-fired burner coil raises water temperatures up to 200°F for rapid degreasing
- Schedule 80 steel pipe coil resists thermal fatigue and high bursting stresses
- Pneumatic 13-inch tires navigate across deep worksite mud and broken gravel
- Five quick-connect spray tips swap fluid dispersion angles for distinct surface prep tasks
- Heavy-duty 50-foot wire-braided hose withstands 250°F hot water flow without wall blistering
Thermal Dyno Load Telemetry
Dynamometer bench testing demonstrates 3470 RPM engine speed under continuous 3450 PSI load resistance. Flow meters record 3.92 GPM water delivery at the nozzle tip. The diesel burner produces a 125°F temperature rise above incoming cold water supply. Engine fuel consumption registers 0.90 GPH while the burner burns 1.55 GPH diesel. Acoustic telemetry indicates 91 dBA at 5 meters.
Operational Boundaries Field Realities
You guide this heavy cart across equipment yards using the tubular steel push bar. The wide four-wheel base prevents frame tip-overs on uneven dirt ground. Do not run this hot water machine inside closed shop buildings without dedicated exhaust flues. Diesel burner exhaust contains dangerous carbon monoxide gases that threaten worker safety.
- Drain heating coil water passages completely before sub-zero winter weather storage
- Inspect burner electrode gap clearance every 250 operational heating hours
- Verify pump oil level through the inspection sight glass prior to starting engine
Commercial Warranty Specifications Manifest
Hot Sting provides a 3-Year Honda engine warranty, 5-Year triplex pump warranty, and 3-Year heating coil warranty. The shipping crate contains the hot water machine, 50-foot wire-braided hose, insulated spray gun, 48-inch lance, 5 quick-connect tips, and complete service manuals.
