Description
Double-sided hedge trimmers leave chopped foliage cluttering hedge tops when shaping long formal privacy screens along estate driveways. The Stihl HS 87 T-Z 30 Inch 22.7 cc Gas Powered Hedge Trimmer with Muffler features a full-length aluminum collector bar that sweeps clippings clear in smooth continuous strokes. It swings a 30-inch single-edge blade. Single-sided trimming requires continuous forward-sweeping operator movement.
A commercial 22.7 cc 2-MIX engine features a stratified scavenging cylinder design that boosts torque while lowering exhaust emissions. The heavy cutter backbone uses extruded aircraft-grade aluminum to keep the long 30-inch bar rigid under load. High-carbon steel cutting teeth are laser-cut and diamond-ground, running against a heavy-duty steel stiffener plate to prevent tooth binding.
Single Sided Commercial Gas Hedge Trimmer
Single-direction cutting combined with a full-length aluminum sweeper plate allows landscape crews to level hedge crowns with billiard-table precision. The balanced engine layout reduces operator fatigue during long sweeping passes.
- 22.7 cc commercial 2-MIX engine delivers 1.0 net Horsepower with high high-revving blade speed.
- 30-inch single-sided shear blade provides expansive reach across wide commercial hedge tops.
- Full-length aluminum collector sweeper bar pushes cut clippings off hedge surfaces during sweeps.
- Rigid aircraft-aluminum blade support backbone prevents bar sagging across the 30-inch length.
- High-speed gearbox ratios generate rapid blade reciprocation up to 5000 strokes per minute.
- Forward-facing exhaust deflector routes hot gases and smoke away from the operator and foliage.
- Four-point anti-vibration system uses rubber mounts to isolate engine flutter from operator hands.
Engine Bench Telemetry Fuel Consumption
Operating wide-open at 8400 RPM under load, the 22.7 cc engine consumes 0.29 GPH of 50 to 1 pre-mix fuel. The commercial gear case reaches 136°F after 45 minutes of continuous ornamental hedge sweeping. Engine mechanical governor holds engine speed within 200 RPM during heavy branch resistance. Acoustic exhaust noise measures 91 dBA at the operator ear position.
Estate Pruning Scope Field Protocols
Commercial estate maintenance crews, topiary specialists, and formal garden caretakers sculpt expansive hedges fast using this single-sided gas unit. Do not use this single-sided machine for rough brush reclamation or hacking through dead branches thicker than 1/2-inch because teeth will wedge. Never run the engine on stale fuel without two-stroke oil mix.
- Rinse sticky plant resin and leaf juice off the cutter teeth using solvent spray after every job.
- Grease the cutter bar gear housing through the threaded zerk fitting every 20 operational hours.
- Clean the commercial felt air filter element every week to maintain correct carburetor airflow.
Commercial Warranty Equipment Shipment Roster
Stihl covers this commercial hedge trimmer with a 2-Year commercial warranty covering the engine block, clutch, and gear drive assembly. The shipping carton contains the HS 87 T-Z hedge trimmer, aluminum sweeper bar, blade scabbard cover, combo wrench, and operator guide.
